Cyclone MAX
Hardware Debug Interface and Stand-Alone Programmer

• Support Freescale ColdFire (MCF5xxx), PowerPC (MPC5xx/8xx), PowerPC Nexus (MPC55xx) and ARM (MAC7xxx).microcontrollers
• USB, Serial, and Ethernet interfaces(Windows 98/98SE/Me/2000/XP)
• Multiple programming images may be stored in Cyclone MAX’s memory.
• An LCD menu display, in conjunction with the status LEDs and buttons, allows stand-alone control and configuration of the Cyclone MAX
• Interactive in-circuit flash programming, debugging, and testing via a Host PC
• Stand-alone programming operation does not require a PC applicable to the use of production
• PC Controlled Stand-alone Programming，P&E provides A command line executable and A dynamically linked library (DLL)(PC Control Of Multiple Cyclones)
• Support CodeWarrior, Cosmic, IAR, P & E, and other development tools
• software and utilities:
Flash Programming

Cyclone MAX IP Setup Utility

Cyclone MAX Image Creation Utility

Cyclone MAX Launch Utility

NOTE：The Cyclone MAX is recommended for production usage

DEV5213CF
MCF5213 Development Kit with embedded USB-to-BDM interface

The 64K Starter Edition of P&E's PKGCFZPRO software development package

DEV5213CF development board

• An embedded P&E USB to BDM interface
• Two RS232 for the UART0/1 processor serial ports
• Built in circuitry allowing one to provide a clock to the target from an 8Mhz crystal or a user provided oscillator
• LEDs connected to GPT0/1/2/3 port pins
• RESET, IRQ1 and IRQ2 buttons
• Powered using the USB bus or a power regulator provided by the user
• Headers containing all the processor's pins
• SOIC, TSSOP through-hole development area
The 64K Starter Edition of the PKGCFZ_PRO_USBis available for download at no charge.

USB-ML-CFE
ColdFire 52xx/53xx/54xx BDM Interface (RoHS Compliant))

• Support Freescale ColdFire 52xx/53xx/54xx
• A USB port on a Windows 98SE/2000/XP/2003/Vista machine
• The standard 26 pin “Berg” debug connector
• Draws power from the USB bus
• Target Voltage: 1.8V-5.5V

  Driver Download：Click here

  NOTE: The USB-ML-CFEInterface is recommended for development.

BDML
BDM Lightning - BDM Accelerator PCI Card

• Run over 10 times faster than a parallel port
• P&E’s ICD, PROG, and UNIT software work with it
• Support CABLE_16/32/16/32LV, CABLE_CF/CFLV, CABLE_MC, CABLE_PPC,
• A PCI slot

BDML_CF
BDM Lightning and CABLE_CF Package (w/DB25)

• Run over 10 times faster than a parallel port
• P&E’s ICD, PROG, and UNIT software work with it
• Support CASMCFZ, ICDCFZ, PROGCFZ , REGCF, UNITCFZ andWINIDECFZ
• CABLE_CF（Included）
• A PCI slot

BDML_CFLV
BDM Lightning and CABLE_CFLV Package (w/DB25)

• Run over 10 times faster than a parallel port
• P&E’s ICD, PROG, and UNIT software work with it
• Support CASMCFZ, ICDCFZ, PROGCFZ , REGCF, UNITCFZ andWINIDECFZ
• CABLE_CF（Included）
• A PCI slot

CAB_RIBBON_26-PIN
26-Pin Ribbon Cable for ColdFire

CABLE_CF
ColdFire BDM Interface (Parallel Port, 5V)

• Support Freescale Freescale ColdFire
• PC parallel port (DB25 female connector) (Windows 98/98SE/Me/2000/XP)
• Works with P&E's ICDCF debugger and PROGCF progr
• 5V targets Power from the target or Power supplier available for purchase
• The standard 26 pin outs ofBDM connector specified by P&E
NOTE: The Multilink cable is recommended for development.

CABLE_CFLV
ColdFire BDM Interface (Parallel Port, 3.3V)

• Support Freescale Freescale ColdFire
• PC parallel port (DB25 female connector) (Windows 98/98SE/Me/2000/XP)
• Works with P&E's ICDCF debugger and PROGCF progr
• 3V targets Power from the target or Power supplier available for purchase
• The standard 26 pin outs of BDM connector specified by P&E
NOTE: The Multilink cable is recommended for development.

CASMCFZ
ColdFire Command-Line Assembler

• Macro support
• S19 objects
• Conditional assembly
• Include files
• Full listing control with cycle counter

CPCI
Compact PCI BDM Accelerator Card

• Run over 10 times faster than a parallel port
• P&E’s ICD, PROG, and UNIT software work with it
• Support CABLE_16/32/1632/LV, CABLE_CF/CFLV, CABLE_MMC, CABLE_PPC
• for the CPCI Card, a slot in your Industrial PC
  

GAL1D1F
Replacement GAL for CABLECF Rev.A-E

GAL1D1FL
Replacement GAL for CABLE_CFLV Rev.A-E

GAL3500L
Replacement GAL for CABLE_CFLV, Rev. F (Surface Mount)

ICDCFZ
ColdFire In-Circuit Debugger

Based on Window98 / ME/NT/2000/XP for debugging code to give the user access to all on-chip resources。

• Full-speed in-circuit emulation
• Breakpoints with counters on the Nth execution
• Variables window showing many data types
• Realtime execution as well as multiple tracing model
• Startup and Macro files for automating the debug process
• Context-sensitive help for all commands
• Timing measurement and execution count functions
• Support for symbolic register files
• Full assembly source-level debugging
• C source-level debug support
A 64K starter version of the ICDCFZ is included in the PKGCFZPRO_USB 64K Starter Edition of the PKGCFZPRO_USB and is available for download at no charge!

GNU Source CD
Source Code For P&E GNU (PRO) Packages

This disc provides the source code required to build the C compiler that is included in the P&E PKGCFZ_PRO and PKGPPCNEXUS include the ready-to-use GNU C compiler.

PKG ColdFire ASM Development Packages

PKGCFZ PKGCFZ ColdFire ASM Development Package (Parallel Port, 5V)

• CABLE_CF ColdFire BDM Interface (Parallel-Port-To-Target, 5-Volt)
• ICDCFZ In-Circuit Debugge
• PROGCFZ Flash/EEPROM Programmer
• WinIDECFZ Windows Integrated Development Environment
• REGCF Register File Viewer/Editor

A 64K starter version of the PROGCFZ is included in the 64K Starter Edition of the PKGCFZPRO_USB and is available for download at no charge!

PKG ColdFire ASM Development Packages

PKGCFZ_LV
PKGCFZ ColdFire ASM Development Package(Parallel Port, 3V)

• CABLE_CFLV ColdFire BDM Interface (Parallel-Port-To-Target, 3.3-Volt)
• ICDCFZ In-Circuit Debugge
• PROGCFZ Flash/EEPROM Programmer
• WinIDECFZ Windows Integrated Development Environment
• REGCF Register File Viewer/Editor

PKG ColdFire ASM Development Packages

PKGCFZ-USB
PKGCFZ ColdFire ASM Development Package（USB Port, Multivoltage）

• USB-ML-CFE ColdFire BDM Interface (USB-Port-To-Target, 1.8V-5.5 Volts)
• ICDCFZ In-Circuit Debugge
• PROGCFZ Flash/EEPROM Programmer
• WinIDECFZ Windows Integrated Development Environment
• REGCF Register File Viewer/Editor

PKG ColdFire C-Level Development Packages PKGCFZ_PRO
PKGCFZ_PRO ColdFire C-Level Development Package(Parallel Port, 5V)

• GNU software components:GCC 、 Binutils 、 Newlib

• CABLE_CF BDM Interface (Parallel-Port-To-Target, 5-Volt)
• ICDCFZ In-Circuit Debugge
• PROGCFZ Flash/EEPROM Programmer
• WinIDECFZ Windows Integrated Development Environment
• REGCF ColdFire Register File Viewer/Editor

PowerPC 55xx (Nexus) simplifies development with GCC:

• Easily configure compiler options within WinIDE
• GCC runs directly from WinIDE and Windows without using a complex UNIX shell
• Without using a makefile, WinIDE builds your C application using a modifiable Windows batch file
• WinIDE highlights syntax errors in your C source code
• Includes startup code and linker scripts for the MCF52xx devices and select evaluation boards
• Program your code into flash using the PROGCFZ flash programmer
• Debug your C code using the ELF/DWARF(v. 2.0) file format and P&E's ICD software

PKG ColdFire C-Level Development Packages PKGCFZ_PRO_LV
PKGCFZ_PRO ColdFire C-Level Development Package(Parallel Port, 3V)

• GNUGNU software components:
• CABLE_CFLV BDM Interface (Parallel-Port-To-Target, 3.3-Volt)
• ICDCFZ In-Circuit Debugge
• PROGCFZ Flash/EEPROM Programmer
• WinIDECFZ Windows Integrated Development Environment
• REGCF ColdFire Register File Viewer/Editor

PKG ColdFire C-Level Development Packages PKGCFZ_PRO_USB
PKGCFZ_PRO ColdFire C-Level Development Package(USB Port, Multivoltage)）

• GNUGNU software components:
• USB-ML-CFE BDM Interface (USB-Port-To-Target, 1.8V-5.5 Volts)
• ICDCFZ In-Circuit Debugge
• PROGCFZ Flash/EEPROM Programmer
• WinIDECFZ Windows Integrated Development Environment
• REGCF ColdFire Register File Viewer/Editor

64K Starter Edition of the PKGCFZ_PR0_USB is available for download at no charge!

PROGCFZ
ColdFire Flash/EEPROM Programmer

PROGCFZ BDM Programmer allows program/reprogram external flash devices in-circuit, via P&E's a 26-pin BDM connector on the target system.

• Program
• Verify
• Blank check
• Upload
• Display
• Erase

REGCF
ColdFire Regsiter Files

• View and edit the registers and register bits
• Shows "Read Only," "Write Only," and "Not Implemented" bits of microcontroller registers
• Works for a variety of Motorola MCF5xxx parts
• Users can create their own register files for any memory-mapped peripherals

REGKIT
Register File Development Kit

This software tool allows a developer to create their own P&E Register Files.

UNITCFZ
ColdFire Cable Interface Library Routines

The package includes both C/C++ and Delphi example routines . The package consists of an interface DLL and sample code。 The C and Delphi modules in the ColdFire Hardware Interface Library Routines come as source code; The library is very useful for building your own production line testers. The demo programs show you how to initialize the interface, program registers, download code and step through code. Starting with these programs it is easy to customize them to your specific requirements.

Key Features：

• Works with ColdFire architectures V1 through P&E's Cyclone Pro and USB-ML-12 Hardware Interfaces
• Works with ColdFire architectures V2/V3/V4 through P&E's Cyclone Max and USB-ML-CF Hardware Interfaces
• Provides Interface to Background Debug Mode
• Included in the package are C/C++ and Delphi modules
• Source and executables provided for both C and Delphi demos
• Number of functions in the library - 36
• Compilers supported:
• UNITCFZ and UNITCFZ_DIST: MicrosoftVisual C++ 5.0 or greater, Delphi 2.0 or greater
• Development platform: Windows 32-bit
• UNITCFZ-LINUX and UNITCFZ-LINUX-DIST: GNU Compiler Collection and Sun Compiler Collection For x84 Kernels: 2.2.x-2.6.x
• UNITCFZ library is very useful for building custom test, calibration, and update applications

WINIDECFZ
ColdFire Windows Integrated Development Environment

WinIDECF allows you to run external programs - including assemblers, C-compilers, debuggers, and flash programmers - in one environment, with a single hotkey for each. WinIDE comes installed with P&E's CASMCF assembler.

Editor features include:

• Fully Reconfigurable
• Allows execution of external programs
• On-screen help

Assembler features include:

• Macro support
• S19, HEX, IEEE695 objects
• Conditional assembly
• Include files
• Full listing control with cycle counter